PLENARY LECTURE: "THE DIMENSIONS OF STEEL"
Prof. H.K.D.H Bhadeshia, Materials Science and Metallurgy, University of Cambridge, United Kingdom
BUEN AYRE B ROOM
BUEN AYRE C ROOM
AUTOMOTIVE APPLICATIONS
PHYSICAL METALLURGY AND ALLOY DESIGN
Chaired by G. Hessling, F. Caballero
Chaired by M. Militzer, M.T. Perrot-Simonetta
10.20 10.40
Paper 43: BAKE-HARDENING EFFECTS IN ADVANCED HIGH STRENGTH STEELS W. Bleck, S. Brühl.
Paper 119 : STUDY OF STRENGTHENING MECHANISMS IN V-N STEELS M. J. Hua, C. I. García, A. J. DeArdo, M. K. Miller, R. J. Glodowski.
10.40 11.00
Paper 132: UNDERSTANDING BAKE-HARDENING IN MODERN HIGH STRENGTH STEELS FOR THE AUTOMOTIVE INDUSTRY USING ADVANCED ANALYTICAL TECHNIQUES I.B. Timokhina, P.D. Hodgson, S.P. Ringer, R.K. Zheng, E.V. Pereloma.
Paper 38: MICROSTRUCTURE DEVELOPMENT IN STEELS SUBJECTED TO A QUENCHING AND PARTITIONING (Q&P) HEAT TREATMENT D. V. Edmonds, K. He, F.C. Rizzo, J.G. Speer, D.K. Matlock.
11.00 11.20
COFFEE BREAK
11.20 11.40
Paper 104: EFFECT OF Nb AND Mo ADDITIONS ON THE MICROSTRUCTURE AND MECHANICAL PROPERTIES OF THERMOMECHANICALLY PROCESSED AND BAKE HARDENED CMnSi TRIP STEEL E. V. Pereloma, I. B.Timokhina , M.K. Miller.
Paper 2: QUENCH & PARTITIONING RESPONSE OF A Mo-ALLOYED CMnSi STEEL E. De Moor, C. Föjer, A.J. Clarke, J. Penning, J.G. Speer.
11.40 12.00
Paper 103 : SIMULATION OF THE STATIC MECHANICAL BEHAVIOUR OF TRIP STEELS BY MICRO-MECHANICAL MODELLING J. Bouquerel, K. Verbeken, P. Verleysen, Y. Houbaert.
Paper 17 : ANALYSIS OF THE QUENCHING AND PARTITIONING (Q&P) PROCESS WITH PARTIAL AUSTENITISATION IN A LOW-CARBON STEEL BY PHASE FIELD MODELLING
M.J. Santofimia, Y. Takahama, L. Zhao, J. Sietsma.
12.00 12.20
Paper 20 : CRACK DEVELOPMENT IN DEPENDENCE OF THE LOCAL MICROSTRUCTURE IN Al-TRIP STEELS J. Imlau, W. Bleck, S. Zaefferer.
Paper 6 : COMPLETE CALCULATION OF STEEL MICROSTRUCTURE FOR STRONG ALLOYS J. Chen, H.K.D.H. Bhadeshia, S. Hasler, H. Roelofs, U. Ulrau.
12.20 12.40
Paper 63: DEVELOPMENT OF HOT ROLLED COPPER/NICKEL ALLOYED TRIP STEELS WITH CARBIDE-FREE BAINITIC MATRIX S. Allain, T. Iung, C. Colin, X. Garat.
Paper 7: MULTIPHASE STRUCTURES IN CASE HARDENING STEELS FOLLOWING CONTINUOUS COOLING H. Roelofs, S. Hasler, L. Chabbi, U. Ulrau, J. Chen, H.K.D.H. Bhadeshia.
12.40 14.00
LUNCH BREAK
AUTOMOTIVE APPLICATIONS
PHYSICAL METALLURGY AND ALLOY DESIGN
Chaired by D.K. Matlock, F. Actis
Chaired by A. DeArdo, M.Sade
14.00 14.20
Paper 36: REVIEW OF THE MECHANICAL PROPERTIES OF HIGH STRENGTH, HIGH-Mn TWIP STEELS FOR AUTOMOTIVE APPLICATIONS
B.C. De Cooman, L. Chen, H.S. Kim, Y. Estrin, S.K. Kim, H. Voswinckel.
Paper 12: DUCTILITY OF ADVANCED BAINITIC STEELS
F.García Caballero, C. García-Mateo, J. Chao, M.J. Santofimia, C. Capdevila, C. García de Andrés.
14.20 14.40
Paper 28 : THE USE OF HIGH STRENGTH STEELS / ULTRA HIGH STRENGTH STEELS IN THE AUTOMOTIVE INDUSTRY S. Maggi, C. Federici.
Paper 60: MECHANICAL PROPERTIES OF CONTINUOUS COOLED STEELS FOR LONG PRODUCTS APPLICATIONS: BAINITE VS. ACICULAR FERRITE NUCLEATED ON V(C,N) PRECIPITATES C. Capdevila, C. García-Mateo, J. Chao, F. García Caballero, C. García de Andrés.
14.40 15.00
Paper 18 : STRUCTURAL INTEGRITY ANALYSIS OF ULTRA HIGH STRENGTH STEEL TUBES FOR AIRBAGS H. A. Ernst, D.N. Passarella, J.A. Villasante, R. Su, E. P.López.
Paper 71: FRACTAL MORPHOLOGY AND MECHANICAL PROPERTIES OF ACICULAR FERRITE MICROSTRUCTURES ON MEDIUM CARBON MICROALLOYED STEELS R. Villegas, A. Redjaimia, M. Confente, M.T. Perrot-Simonetta.
15.00 15.20
Paper 84 : THE DEVELOPMENT OF AN ALTERNATIVE PROCESS TO PRODUCE AUTOMOTIVE STABILIZER BARS E. P.López, S. Beretta, H. Desimone, P. Folgarait, R. Porta.
Paper 5: ACICULAR FERRITE TRANSFORMATION UNDER THE INFLUENCE OF V PRECIPITATES
C. García-Mateo, J. Cornide, C. Capdevila, F. García Caballero, C. García de Andrés.
15.20 16.20
POSTER SESSION / COFFEE BREAK
16:20 16.40
Paper 58: WELDING OF ADVANCED HIGH STRENGTH STEELS: STUDY OF THE MICROSTRUCTURES OBTAINED AND DAMAGE MECHANISMS DURING CROSS TENSION TEST S. Dancette, D. Fabrègue, J. Merlin, V. Massardier-Jourdan, M. Bouzekri.
Paper 93: KINETICS OF PRECIPITATION AND DISSOLUTION IN MODEL FeCV AND FeCVNb ALLOY, AND A MICROALLOYED ULTRA HIGH STRENGTH SPRING STEEL D. Acevedo, M. Pérez, T. Epicier, E. Kozeschnik, F. Perrard, T. Sourmail.
16.40 17.00
Paper 79: WELDING OF FINE-GRAINED STEELS FOR AUTOMOTIVE APPLICATIONS H.G. Svoboda, M. R. de Rissone., E.S. Surian, L.A. de Vedia.
Paper 95 : EXPERIMENTAL AND NUMERICAL EVALUATION OF FORMING AND FRACTURE BEHAVIOUR OF HIGH STRENGTH STEEL C. Nikhare, P. V. Marcondes, M. Weiss, P. D. Hodgson.
17:00 17.20
Paper 111: NEW GENERATION OF HIGH STRENGTH BAINITIC STEELS (HSBS) FOR LARGE FORGING AND AUTOMOTIVE COMPONENTS
M.T. Perrot-Simonetta, B. Resiak, M. Confente.
Paper 55: EFFECTS OF COMPOSITION, TEMPERATURE AND STRAIN RATE ON THE MECHANICAL BEHAVIOR OF HIGH-ALLOYED MANGANESE STEELS S. Curtze, V. T. Kuokkala, M. Hokka, P. Peura, P. Verleysen.
17.20 17.40
Paper 139: AN EFFICIENT APPROACH TO SPRINGBACK COMPENSATION FOR ULTRA HIGH STRENGTH STEEL STRUCTURAL COMPONENTS FOR THE AUTOMOTIVE FIELD
F. Placidi, R. Vadori, F. Cimolin, F. Campana.
Paper 136: METALLURGICALLY BASED DEVELOPMENT OF HIGH STRENGTH (YS > 700 MPa) THIN HOT STRIPS BY ARVEDI I.S.P. TECHNOLOGY
M. C. Cesile, G. Porcu, A. Guindani, R. Venturini.
17.40 18.00
Paper 13: EFFECT OF Nb ON THE PHASE TRANSFORMATION AND MECHANICAL PROPERTIES OF ADVANCED HIGH STRENGTH DUAL-PHASE STEELS
O.A. Girina, N. M. Fonstein, D. Bhattacharya.
TUESDAY 27 MAY
TIME
BUEN AYRE B ROOM
09.00 09.55
PLENARY LECTURE: “DEVELOPMENT OF A PULVERIZE FUEL FIRED HIGH EFFICIENCY POWER PLANT (AD700) AN IMPORTANT ISSUE FOR FUTURE POWER GENERATION”
Msc. R. Blum, General Manager, Research & Development Dong Energy Power, Denmark.
BUEN AYRE B ROOM
BUEN AYRE C ROOM
HIGH TEMPERATURE APPLICATIONS
PHYSICAL METALLURGY AND ALLOY DESIGN
Chaired by G. Cumino, V. Sklenicka
Chaired by H.K.D.H. Bhadeshia, C. Capdevila
10.00 10.20
Paper 100: NEW DEVELOPMENT ON BORON METALLURGY OF CREEP-RESISTANT 9% Cr STEEL FOR USC POWER PLANT AT 650º C F. Abe.
Paper 42: THERMOMECHANICAL PROCESS VARIABLES AFFECTING AUSTENITE MICROSTRUCTURE HOMOGENEITY IN MICROALLOYED STEELS
B. López, J. M. Rodríguez-Ibabe.
10.20 10.40
Paper 16: CREEP RESISTANT HIGH BORON 9-12% CHROMIUM STEELS FOR STEAM POWER PLANTS H. O. Andrén, A. Golpayegani.
Paper 131:THE RECRYSTALLIZATION BEHAVIOUR OF Nb MICROALLOYED STEELS P.D. Hodgson, H. Beladi.
10.40 11.00
COFFEE BREAK
11.00 11.20
Paper 120: CREEP BEHAVIOUR AND MICROSTRUCTURAL CHANGES IN 9-12% Cr STEELS UNDER NONSTEADY LOADING
V. Sklenicka, K. Kucharova, M. Svoboda, J. Cmakal.
Paper 69: ADVANCED STEELS WITH COMPLEX ULTRA-FINE GRAINED MICROSTRUCTURES
M. Militzer, S. Sarkar, K. Mukherjee, H. Azizi-Alizamini, W.J. Poole.
11.20 11.40
Paper 11: THE RELATION BETWEEN MICROSTRUCTURE AND CREEP PROPERTIES OF MARTENSITIC 9-12% Cr STEELS
H. Cerjak, I. Holzer, P. Mayr, C.Pein, B.Sonderegger, E. Kozeschnik
Paper 89: PRODUCTION OF ULTRAFINE GRAINED STRUCTURE IN MEDIUM CARBON STEEL BY LARGE WARM STRAINING
J. Zrnik, S.V. Dobatkin, Z. Novy, O. Stejskal.
11.40 12.00
PAPER 85: LONG TERM MICROSTRUCTURAL EVOLUTION OF 9-12% CR MARTENSITIC STEELS FOR ADVANCED USC PLANTS S. Caminada, L. Cipolla, G. Cumino, A. Di Gianfrancesco, P. Di Nunzio, D. Venditti.
Paper 137: METALLURGICAL IMPACT OF HOT ASYMMETRIC ROLLING ON GRAIN REFINEMENT I. Salvatori, M. Lubrano, E. Petrone, A. Montanari, G. Porcu.
12.00 12.20
Paper 27 : CREEP LIFE PREDICTIONS IN 9% Cr FERRITIC STEELS
Y.F. Yin, R. G. Faulkner.
Paper 23: EFFECT OF CONSTITUENT PHASES ON THE MECHANICAL PROPERTIES OF BAINITE-BASE MULTIPHASE STEELS
H. Lee, C. H. Seo, N.J. Kim.
12.20 14.00
LUNCH BREAK
HIGH TEMPERATURE APPLICATIONS
PHYSICAL METALLURGY AND ALLOY DESIGN
Chaired by F. Abe, H. Cerjak
Chaired by P.D. Hodgson, C. García-Mateo
14.00 14.20
Paper 82: FERRITIC AND AUSTENITIC GRADES FOR NEW GENERATION OF STEAM POWER PLANTS S. Caminada, L. Cipolla, G. Cumino, A. Di Gianfrancesco. Y.Minami , T.Ono
Paper 118: NEW METHOD OF CHARACTERIZING AND QUANTIFYING COMPLEX MICROSTRUCTURES IN STEELS A. J. DeArdo, C. I. García, K. Cho, M. Hua.
14.20 14.40
Paper 70: FATIGUE BEHAVIOUR OF REDUCED ACTIVITY FERRITIC/MARTENSITIC STEELS M. Avalos, I. Alvarez-Armas, A.F. Armas.
Paper 66: INVESTIGATIONS AND MODELLING OF THE WORK HARDENING OF AS-QUENCHED MARTENSITE S. Cobo, O. Bouaziz.
14.40 15.00
PAPER 158: A CONTINUUM DAMAGE MECHANICS MODEL FOR FAILURE OF METALS IN HIGH TEMPERATURE ENVIRONMENT N. Bonora, L. Esposito.
Paper 24: PREDICTING THE STRENGTH AND DUCTILITY OF ULTRAFINE GRAINED INTERSTITIAL FREE STEELS USING IRREVERSIBLE THERMODYNAMICS M. Huang, P. E. J. Rivera Díaz del Castillo, O. Bouaziz, S. van der Zwaag.
15.00 15.20
PAPER 157: MICROSTRUCTURE EVOLUTION, CREEP DAMAGE MECHANISMS AND LIFE PREDICTION OF HIGH CHROMIUM MARTENSITIC STEEL ASTM GRADES 91 AND 92 L. Cipolla, P. Lombardi, P. Folgarait, A. Di Gianfrancesco, N. Bonora, L. Esposito, G. Cumino, S. Caminada.
Paper 44: MICROMECHANICS ANALYSIS OF APPLIED STRESS EFFECTS UPON DIFFUSIONAL FERRITE NUCLEATION IN AUSTENITE
K.M. Lee, H.C. Lee, J.K. Lee.
15.20 16.00
POSTER SESSION / COFFEE BREAK
16.00 16.20
Paper 49: HETEROGENEOUS AUSTENITE GRAIN GROWTH IN AN ASTM A213 T91 STEEL: COUPLED INFLUENCE OF THE INITIAL METALLURGICAL STATE AND THE HEATING RATE TO AUSTENITE N. Zavaleta Gutiérrez, M. I. Luppo, C. García de Andrés, C.A. Danon.
Paper 75: MICROSTRUCTURAL CONTROL AND PROPERTIES IN Nb-MODIFIED CARBURIZED STEELS K.A. AlOgab, D. K. Matlock, J.G. Speer.
16.20 16:40
Paper 123: DEVELOPMENT OF FILLER MATERIALS FOR NEW 9-12% Cr MARTENSITIC CREEP RESISTANT STEELS C. Chovet, E. Bauné, G. Ehrhart, E. Galand G. Liberati.
Paper 72: UNDERSTANDING THE INFLUENCE OF COMPOSITION ON MECHANICAL PROPERTIES OF ULTRA HIGH STRENGTH MARAGING STEELS K. Stiller, M. Andersson.
16.40 17:00
Paper 121: EXPERIENCE IN WELDING GRADES 23, 91 AND 92 TUBES AND PIPES FOR APPLICATIONS IN MODERN POWER PLANTS E. Bauné, E. Galand, B. Leduey, S. Caminada, G. Cumino, A. Di Gianfrancesco, L. Cipolla.
Paper 3: THE EFFECT OF ALLOYING ELEMENTS ON CEMENTITE DISSOLUTION IN HYPER-EUTECTOID STEELS N.V. Luzginova, L. Zhao, J. Sietsma.
17.00 17.20
Paper117: ELEVATED TEMPERATURE PROPERTIES OF Nb-MICROALLOYED “FIRE-RESISTANT” CONSTRUCTIONAL STEELS J.G. Speer, R.W. Regier, D.K. Matlock, S.G. Jansto.
Paper 67: LOCAL DEFORMATION BEHAVIOUR OF HIGH-STRENGTH PM-TOOL STEELS P.J. Gruber, G. Jesner, R. Ebner, O. Kolednik.
WEDNESDAY 28 MAY
TIME
BUEN AYRE B ROOM
09.00 09.55
PLENARY LECTURE: “A PROSPECTIVE ON ON SHORE AND OFF SHORE
PETROBRAS MATERIAL REQUIREMENTS”
Eng. M. J. Barbosa Teixeira. Off Shore Facilities Manager, Petrobras, Brazil
Eng. S. R. Sanandres. On Shore Facilities Manager, Petrobras, Brazil
BUEN AYRE B ROOM
BUEN AYRE C ROOM
HIGH TEMPERATURE APPLICATIONS
OIL AND GAS APPLICATIONS
Chaired by A. Di Gianfrancesco, O. Andrén
Chaired by D. Edmonds, T. Pérez
10.00 10.20
Paper 41: EVALUATION OF SPECIFICATION RANGES FOR CREEP STRENGTH ENHANCED FERRITIC STEELS J.P. Shingledecker, M.L. Santella, K.A. Wilson.
Paper 15: CREATION AND DEVELOPMENT OF AIR-COOLED Mn-SERIES BAINITIC STEELS H. S. Fang, C. Feng, Y. K. Zheng, Z. G. Yang, B. Z. Bai.
10.20 10.40
Paper 145: HIGH TEMPERATURE PROPERTIES AND CREEP BEHAVIOUR OF A CrMoCoB (FB2) STEEL TRIAL ROTOR A. Di Gianfrancesco, L. Cipolla, D. Venditti, S. Neri, M. Calderini, S. Concari.
10.40 11.00
COFFEE BREAK
11.00 11.20
Paper 33: LIFE PREDICTION OF HIGHER STRENGTH STEELS FOR POWER PLANT APPLICATIONS I. Le May, H. Cunha Furtado, L. H. de Almeida.
Paper 92: STRONG BAINITIC STEELS BY CONTINUOUS COOLING TRANSFORMATION G. Gómez, T. Pérez, H.K.D.H. Bhadeshia.
11.20 11.40
Paper 50: KINETICS OF THE AUSTENITE-FERRITE ISOTHERMAL PHASE TRANSFORMATION IN 9%Cr LOW ACTIVATION MARTENSITIC STEELS C. A. Danon, T. Guilbert, J. C. Brachet.
Paper 141: EFFECT OF CHEMICAL COMPOSITION ON HARDENABILITY AND RESPONSE TO TEMPERING OF HIGH STRENGTH LOW-C STEELS A. Di Schino, A. Izquierdo, E. Anelli.
11.40 12.00
PAPER 26: CONTROL OF DBTT IN FERRITIC PRESSURE VESSEL STEELS. N. Riddle, Z. Lu, R. G. Faulkner.
PAPER 8: THE DEVELOPMENT OF HIGH STRENGTH HEAVY PLATE FOR THE PIPE INDUSTRY USING MODERN EXPERIMENTAL AND NUMERICAL METHODS F. Grimpe, S. Meimeth, H. Meuser, E. Muthmann, A. Liessem, C. Stallybrass.
12.00 12.20
Forum for Discussion about Tendencies on High Temperature Materials Requirements. Chaired by R. Blum
PAPER 144: A CRITICAL REVIEW OF THE DEVELOPED AND AVAILABLE KNOW HOW DEVOTED TO A SAFE USE OF X100 GRADE STEEL IN LARGE DIAMETER PIPELINES G. Demofonti, G. Mannucci.
12.20 14.00
LUNCH BREAK
PHYSICAL METALLURGY AND ALLOY DESIGN
OIL AND GAS APPLICATIONS
Chaired by J. Rodriguez-Ibabe, J. Speer
Chaired by J. C. González, E. Anelli
14.00 14.20
Paper 30: FATIGUE OF AN ULTRA-FINE GRAINED LOW CARBON STEEL M. D. Chapetti, T. Tagawa, T. Miyata, M. Fujioka.
Paper 146: DEVELOPMENT OF HIGH STRENGTH LINEPIPE STEEL J. Y. Yoo, D. H. Seo, S. S. Ahn, K. B. Kang.
14.20 14.40
Paper 97:THE EFFECT OF MISCHMETAL INCLUSIONS ON THE FATIGUE PROPERTIES OF AN ULTRA-HIGH STRENGTH STEEL P. Hill, M. J. Rawson.
Paper 87: METALLURGICAL ASPECTS OF HIGH-STRENGTH STEEL GRADES AND THEIR PROCESSING THROUGH CSP® TECHNOLOGY C. P. Reip, J. Kempken, J. Schlüter.
14.40 15.00
Paper 56: TWO METHODS FOR DETERMINATION OF FATIGUE CRACK PROPAGATION LIMIT CURVES AND THEIR APPLICATION FOR HIGH STRENGTH STEELS J. Lukács.
Paper 37: MANUFACTURING CHALLENGES OF HIGH STRENGTH LINEPIPES A. Liessem, J. Schröeder, M. Pant, M. Erdelen-Peppler, M. Liedtke, S. Höhler, C. Stallybrass.
15.00 15.20
Paper 22: LATEST DEVELOPMENTS IN THE PRODUCTION AND USE OF HIGH STRENGTH STRUCTURAL STEELS L. Weber, L.G. Cajot, J. C. Gerardy.
Paper 143: ENI TAP PROJECT MECHANICAL DAMAGE AND ENVIRONMENTAL ASSISTED CRACKING - FULL SCALE METHODOLOGY OVERVIEW G. Demofonti, M. Cabrini, F. Marchesani, C. M. Spinelli.
15.20 15.40
PAPER 124: CHARACTERIZATION OF INDUCTION ASSISTED WELDS IN HIGH STRENGTH STEEL GRADES J. A. Guio, H. Pinto, J. García, A. Jahn, J. Standfuss, A. R. Pyzalla.
Paper 21: THE DEVELOPMENT OF NEW STEEL GRADES AND PRODUCTS - CASTING AND ROLLING OF API X70 GRADES FOR ARCTIC APPLICATION IN A THIN SLAB ROLLING PLANT A. Carboni, A. Pigani, G. Megahed, S.K. Paul.
15.40 16.00
COFFEE BREAK
16.00 16.20
Paper 140: DEVELOPMENT AND VALIDATION OF MECHANICAL PROPERTIES MODELS FOR DP STEELS J. H. Bianchi, P. Vescovo.
Paper 142: PREDICTION OF MICROSTRUCTURE AND HARDNESS OF MULTIPASS HEAT AFFECTED ZONE IN HIGH STRENGTH STEEL GIRTH WELDS P. E. Di Nunzio, M.C. Cesile, E. Anelli, G. Richard.
16.20 16:40
Paper 133 : A NOVEL APPROACH TO MODEL THE NUCLEATION AND OVERALL TRANSFORMATION KINETICS OF BAINITE IN MEDIUM-CARBON STEELS S. M. C. van Bohemen, J. Sietsma.
Paper 25: DEVELOPMENT OF A NEW GENERATION OF WELDED HIGH STRENGTH HEAVY WALL UPSET WORK OVER RISER 90KSI FOR SOUR SERVICE APPLICATION A. Izquierdo, L. Lunde, H. Quintanilla, E. García, T. Mann, S. Ramberg, B. Thorkildsen, N. Lumsden, P. O. Hansson.
16.40 18:00
ROUND TABLE: Present and Future of High Strength Steels.
Posters Presentation
Automotive Applications
Paper 65
Effects of Low Temperature Heat Treatments on Microstructures and Properties of 0.2-0.3%C Cold Rolled Martensitic Steels. S. Cobo, C. Colin, S. Allain.
Paper 76
Effect of YAG Laser Cutting Pulse Energy on Stretch-flangeability of Trip Sheet Steel with Bainitic ferrite Matrix.
A. Nagasaka, Y. Kubota, K. Sugimoto, K. Makii.
Paper 90
Modification of Structure and Properties of TRIP Steel by Forging Thermomechanical Process. J. Zrnik, O. Muransky, P. Hornak, O. Stejskal.
Oil and Gas Applications
Paper 57
The Role of Process Models, Flow Charts and Material Databases on the Structural Integrity of High Strength Steel Pipeline Systems. J. Lukács, G. Nagy, I. Török.
Paper 78
Corrosion Behaviour and Mechanical Properties of Supermartensitic Stainless Steel All-Weld Metals. A. Burgueño, S. Zappa, H.G. Svoboda, E.S. Surian, L.A. de Vedia.
Paper 122
Welding Consumables Development for High Strength Steel Joints for Oil & Gas Applications. A. E. Traizet, E. Galand, C. Chovet, B. Leduey.
Paper 130
new state of the art in equipment and structure security and maintenance of the gas & oil industry. J. Vivas Hohl, F. Alegre, V. Mesa, J. Fernandez Bugna, G. Corti, G. Sánchez Sarmiento, G.Martín.
Physical Metallurgy and Alloy Design
Paper 1
Metallographic Technique for Revealing Prior Austenite and Multiphase Microstructure in Steel. A. Salemi, A. Abdollah-Zadeh.
Paper 9
Microstructural Transformations on Quenched and Tempered ASA CA 80 Steel Welds. S. Missori, E. Tata, G. Constanza, A. Sili.
Paper 39
Strengthening and Toughening GMAW Weld Metal. Z. Huang, J. Liu, K. Miao, Y. Zhang.
Paper 40
Effect of chromium addition on the microstructure and mechanical properties of
fe-10ni-6cr-2mn
maraging steels. SH. Meimandi, S.H. Nedjad, S. Yazdani, M.N. Ahmadabadi.
Paper 45
Evaluation of Retained Austenite in High Strength Steels. S. Nemecek, Z. Novy, J. Uhlir, J. Janovec, M. Kusy.
Paper 47
Computational Design of UHS Stainless Steel Strengthened by Multi-Species Nanoprecipitates Combining Genetic Algorithms and Thermokinetics. W. Xu, P.E.J. Rivera Diaz del Castillo, S. van der Zwaag.
Paper 53
FCC/HCP martensitic transformation temperatures and thermal cycling evolution in fe-mn-cr alloys. M. Sade, A. Baruj, H.E. Troiani.
Paper 61
Investigation on the boron effect on the high temperature behaviour of a 0.04c-1.5mn-0.3si steel. I. Mejía, E. López-Chipres, C. Maldonado, A. Bedolla-Jacuinde, M Wahabi, J.M. Cabrera.
Paper 86
The effect of carbon on the electronic structure of feni alloys containing a stacking fault. G. González, P. Jansen, E. González, L. Moro, A. Juan.
Paper 101
Characterisation of Flat Rolled High-Silicon Steel by EBSD. P. R. Calvillo, J. Schneider,Y. Houbaert.
Paper 102
Characterisation of oxides on high-si steel by ebsd. L. Suarez, P. R. Calvillo,Y. Houbaert.
Paper 106
Rolled Strip with Improved Strength of Vanadium-microalloyed Steel for Automotive Application. L. M. Panfilova, L. A. Smirnov.
Paper 107
Development of Processing Technology for Shapes of Low-alloyed High Strength Steels Microalloyed with Vanadium. B.Z. Belenkiy, L. A. Smirnov, P. S. Mitchell, J.M. Srogovich.
Paper 110
Austenite Decomposition in Fe-Mn-Al-C Alloys. I. Zuazo, Y. Bréchet, P. Maugis.
Paper 115
Sensitivity to Hydrogen Embrittlement of X52, X70 and X100 Pipe Steels. J. Capelle, G. Pluvinage.
Paper 138
Localised Heat Treatment To Improve Free Design of Structural Steel Components. F. Valente, F. Placidi, L. Rizzo.
Paper 149
Influence of microalloying elements (nb, v, ti) on bainitic high strength steels. L. Rancel, S.F. Medina.
Paper 152
Failure Analysis of Supporting Cylinder with Specific Microstructure of Under-surface Layer. J. Kasl, D. Jandová, F. Jandoš.
Paper 153
Searching for Structural Amorphous Steels. F. Bassi, G. Lavorato, J. Moya, H. Sirkin.
Paper 154
Niobium-Bearing Steel Development for Value-Added Structural Applications. S. G. Jansto.
Paper 156
Influence of Austenite Precipitation on the Toughness of a Maraging Steel Class 300. J. M. Pardal, S.S.M. Tavares, M. P. C. Fonseca, M. R. da Silva, H. F. G. Abreu.
Posters Presentation
